Aluminium Alloys Additives

Ni Tablet

This product is a new product replacing master alloy. It is a block product made of pure metal powder and flux with certain characteristics mixed uniformly in a certain proportion and pressed.


Product parameters:

1. Composition analysis: metal powder + balance

2. Metal powder: nickel: 75% - 95%

3. Balance: A, sodium free flux B, aluminum C, flux + aluminum

4. Color mark: yellow

5. Weight: A, 500g-1000g B, 50-200g

6. Shelf life: 8 months


Product introduction:

This product is a new product replacing master alloy. It is a block product made of pure metal powder and flux with certain characteristics mixed uniformly in a certain proportion and pressed.

 

Instructions:

A. The dross on the surface of the molten pool is removed, and the additive is uniformly put into the molten pool at the normal operating temperature (740-750.degree. C.), and then it is allowed to stand for 20-30 minutes. 

B. No weighing is required before use.

C. All plastic packaging is chlorine free film, which can be directly put into the furnace without generating harmful gas.

D. In order to make the alloy elements evenly distributed and completely recovered, the molten pool shall be fully stirred after standing. After 7-15 minutes, the scum shall be removed and the chemical composition shall be analyzed.

 

 

Analysis:(metallic   powders+balance)

Metallic powders

Ni:75%、80%、85%、90%、95%

Balance

1.      Pure aluminum

2.      Non-hygroscopic sodium free   flux

3.      Pure aluminum +   non-hygroscopic sodium free flux

Colour Code

Yellow


Tablets

Mini-tablets(Briquettes)

Unit Weight

From 500g to 1000g

From 50g to 200g.

Packing

Two or three tablets wrapped directly by   aluminum foil.

20kgs in a cardboard

10kg to 20kg in kraft paper bag.

Guarantee period

8months

Remark

Also could produce on request

Send an Inquiry

Your email address will not published. Required fieled are marked.

Related Products