Aluminium Refining Fluxes

Aluminium Refining Flux without Natrium

This product can effectively remove the inclusion and hydrogen in the liquid aluminum alloy, does not bring sodium ions, improve the internal quality of the material, improve the mechanical properties of the product and has good slag removal.

Suitable for refining of sodium - free aluminum and aluminum alloy melt.

Product parameters:

1. Application: suitable for refining aluminum and aluminum alloy melt with sodium ion.

2. Product performance: This product can effectively remove the inclusions and hydrogen in the aluminum alloy liquid, without bringing sodium ions, improve the internal quality of the material and improve the mechanical properties of the product.

3. Storage packaging: This product is white powder, and the outer packaging is cardboard box. Store in a ventilated and dry place, moisture-proof;

4. Shelf life: 1 year. It can be used normally when it is crushed into powder and dried at < 150 ℃.

Performance characteristics:

1. This product can effectively remove the inclusion and hydrogen in the liquid aluminum alloy, does not bring sodium ions, improve the material internal quality, improve the mechanical properties of the product.

2. This product slag aluminum separation is good, both good slag cleaning.

3. There is no toxic gas and obvious smoke in the use of this product, and it has no adverse effect on human body, equipment and environment.

Scope of application:

It is suitable for refining of sodium - free aluminum and aluminum alloy melt.

Zs-az6 sodium free slagging agent should be used to remove a large amount of scum before refining.

Recommended usage:

1. Artificial scattering method: manually throw the refining agent powder evenly onto the surface of liquid aluminum, press it into the inner depth of liquid aluminum with a plate tool with mesh, and stir it so that the powder is distributed in the molten pool as far as possible, after the reaction is finished, stand for 10 ~ 15 minutes, slag scraping.

2. Inert gas spraying method: Spray refining powder evenly into the melt with the spraying device, stir evenly, stand for 10 ~ 15 minutes, then slag scraping.

3. Adding temperature: above 680℃.

4. The amount of this product added: 0.2~0.6% of the amount of aluminum to be treated.

Packaging and storage:

This product is white powder, inner packing is plastic bag ironed, 2kg/ bag, outer packing is carton, 20kg/ box, stored in ventilated dry place, moisture-proof.

Shelf life:

For one year. When damp agglomerate,It can be used normally when it is hit into powder and dried at <150℃

Product parameters:

1. Application: suitable for refining aluminum and aluminum alloy melt with sodium ion.

2. Product performance: This product can effectively remove the inclusions and hydrogen in the aluminum alloy liquid, without bringing sodium ions, improve the internal quality of the material and improve the mechanical properties of the product.

3. Storage packaging: This product is white powder, and the outer packaging is cardboard box. Store in a ventilated and dry place, moisture-proof;

4. Shelf life: 1 year. It can be used normally when it is crushed into powder and dried at < 150 ℃.

Send an Inquiry

Your email address will not published. Required fieled are marked.

Related Products